Musicians Gear Heavy Duty Basic Mic Clip
from Musicians Gear
Here's a heavy duty black microphone grip with plastic mic swivel retainer and brass insert.
Behringer Ultra-Compact Phantom Power Supply PS400
from Behringer
- Universal phantom power supply for any condenser microphone
- Ultra low-noise audio performance
- Selectable +12 / +48 V power supply
- High-quality components and exceptionally rugged construction ensure long life
- DC 12-Volt adapter included
The ultracompact Behringer MICROPOWER phantom power supply supplies +12V or +48V phantom power to any type of condenser microphone and routes the microphone signal to a mixer or a microphone preamplifier. The PS400 gives you low-noise audio performance in a compact package.
Rolls PB23 Phantom Power Adapter
from Rolls
- Phantom voltage: 12V or 48V selectable
- Jacks: Male and Female XLR
- 2: 5mm DC input jacks
- Control: 12/48 volt selector switch
- Power Input 14 - 18 VCD (included)
For powering phantom powered microphones with either 12VDC or 48VDC. Since the units use a 100KHz switching power supply there is no audio noise generated. They have output pull down resistors so they will work with any mixer and have 2DC jacks so several units can use one adapter. Phantom voltage: 12V or 48V selectableJacks: Male and Female XLR 2: 5mm DC input jacksControl: 12/48 volt selector switchPower Input 14 - 18 VCD (included)Size: PB223: 6" x 2.5" x 1.25"Weight: PB223 - 1.5 lbs. (.68 Kg)
Behringer PS400 Ultra-Compact Microphone Phantom Power Supply
from Behringer
- Selectable +12 / +48 V power supply
- High-quality components and exceptionally rugged construction ensure long usage
The PS400 Ultra-Compact Phantom Power Supply enables you to select between two different power supplies with low-noise audio performance.
Blue Series Two Shockmount for Blueberry Microphones
from Blue
Shockmount for Blue microphones' "Blueberry". Microphone not included.
Rolls RPB486 Phantom Hex XLR IN, 1/4 Inch TRS Balanced OUT, Perfect for Digital Multitrack Use
from Rolls
- XLR Input, 1/4" TRS Balanced Output.
- 48 Volt Regulated Phantom Power.
- LED In Use Indication.
- Perfect for digital multitrack use.
The RPB486 powers up to 6 condenser microphones with 48 volts of ultra clean phantom power. The outputs are 1/4" Tip-Ring-Sleeve balanced for easy connection to a digital multi-track recorder. To eliminate the possibility of any DC voltages, the RPB486 features pull-down resistors and isolation capacitors on all outputs.
Rolls PB223 Dual Phantom Power Supply
from Rolls
- Phantom voltage: 12V or 48V selectable
- Jacks: Male and Female XLR
- 2: 5mm DC input jacks
- Control: 12/48 volt selector switch
- Power Input 14 - 18 VCD (included)
For powering phantom powered microphones with either 12VDC or 48VDC. Since the units use a 100KHz switching power supply there is no audio noise generated. They have output pull down resistors so they will work with any mixer and have 2DC jacks so several units can use one adapter. The PB223 powers two microphones.Phantom voltage: 12V or 48V selectableJacks: Male and Female XLR 2: 5mm DC input jacksControl: 12/48 volt selector switchPower Input 14 - 18 VCD (included)Size: PB223: 6" x 2.5" x 1.25"Weight: PB223 - 1.5 lbs. (.68 Kg)
R0DE SM1 Shockmount
from R0DE
- R0DE SM1 Shockmount for NT1/NT2
SM-1 Shock mount for Rode NT-1 and NT-2 microphones
Audio-Technica CP8506 4CH Phantom Power Supply
from Audio-Technica
- Number of Channels: 4
- Regulated output Voltage: 48V 2V DC
- Current 14mA per channel
- Residual Output Noice: -71 dBV
- Frequency Response: 10-25,000 Hz
These line-powered devices allow the use of remote-powered microphones with systems that do not supply phantom power. Each unit features a highly-regulated power supply which provides a constant voltage source, even with a heavily-loaded input. The regulator IC is internally protected to prevent overheating or damage even if shorted. The rugged steel case is finished in enamel and provides shielding from electrostatic interference.
+++



